A5 M50 Pro
30W Cost-Effective Portable Laser Engraver
➢ Eye-protection flame-retardant filter panoramic glass: The flame-retardant filter panoramic glass can filter 97% of the ultraviolet light, which plays a very good role in protecting your eyes. You and the people around you do not need to wear goggles, you can also clearly Watch laser engraving. Reduce the cost of your goggles and the inconvenience of wearing goggles. The glass is flame retardant and safer to use.
➢ Robust and easy-to-install structure design: The all-aluminum alloy anodized structure design makes the machine more durable and improves the accuracy of engraving. The portable all-metal structure, 85% pre-assembly, can be installed in 5 minutes.
➢ Upgraded version of high-performance fixed-focus laser: engraving without adjusting the focal length, the laser focus area is about 50% smaller than other lasers; up to 5.5W laser power can cut thick wood, acrylic, and rubber materials; at the same time, it can engrave stainless steel and ceramic materials. (Need to be blacked out).
➢ Wide compatibility: The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / Win 10, and also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc.
➢ Precise scale lines axis: There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. 200*200mm large area engraving interval can meet your various engraving needs.
➢ Integral screw rod: The machine uses an integrated screw rod instead of a combined coupling. The stepping motor and the screw rod are integrated, which makes the movement of the laser more precise and the coupling more durable.
➢ New laser with knob: It is more convenient and quick to adjust the height of the laser.
➢ Colorful gift box packaging: more beautiful and more convenient to give gifts
12 Months maintenance
Item model number:
ATOMSTACK P7 M30
wood, bamboo, cardboard, plastic, leather, MDF, slate, lacquered metal, mirror stainless steel;
cardboard, non-woven fabric, veneer, acrylic, some thin plastic board, sponge, MDF, leather;
Laser output power:
445 ± 5nm
fixed focus laser, no need to focus
Laser protective cover:
Protect the user's eyes and prevent pets from grabbing the laser spot.
LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / Win 10 system.
NC, BMP, JPG, PNG, DXF, etc.
Data transmission method:
CE FCC RoHS FDA PSE
|P7 LASER ENGRAVER PACKAGE|
|Assembly block *4||Laser*1||Laser slide*1|
|Foot pad foam*4||USB cable*1||Open wrench*1|
|Y-axis belt assembly*1||Marker *1||Cable tie*5|
|Screw*4||Hexagonal Wrench*2||Wood chips*3|
|Fixed focus film*1||Acrylic sheet*3||Cutting pad *1|
|Lower support foot*1||Upper support foot*1||Control box*1|
|X axis assembly*1||Y axis assembly*1||Power adapter*1|
➢ When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles.
➢ Please do not touch the laser emitter with your hand, or it may burn your hand.
➢ Please avoid strong impact on the machine.
➢ Children under 14 are not allowed to use this product and children over 14 need adult supervision.
➢ The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.