How to improve marking efficiency and requirements for marking accuracy
The purpose of the optical fiber laser marking machine is to bring higher production efficiency and create higher value to the enterprise. Then how to improve the marking speed of the optical fiber laser marking machine? Next, the technicians of the laser marking machine manufacturer will introduce to you.
1. The main factors affecting the optical fiber laser marking machine are divided into internal factors and workpiece processing factors.
The internal factors mainly include laser frequency, laser spot mode and beam divergence angle, laser power, auxiliary gas substances during reasonable optical shaping and processing. The internal factors are mainly paid attention to during the selection of earlier models, which should be purchased according to the opinions of laser engineers. The other factors mainly need to be paid attention to when customers are processing, which are mainly the marking density, marking format, marking depth and laser spot size.
2. Marking density.
In the case of the same width, the same spot and the same depth, the higher the marking density, the slower the corresponding marking speed, because the density directly increases the marking area.
3. Marking format.
Because the deflection area of large format marking galvanometer increases, the marking speed of large format marking is slower than that of small format marking.
4. Marking depth.
According to the demand, if it is necessary to deepen the deep laser marking machine, the parameters of the optical fiber laser marking machine need to be adjusted to increase the power, current and other factors of the optical fiber laser marking machine. Therefore, the marking speed will be affected in these processes.
5. Laser spot size.
The smaller the spot, the smaller the corresponding marking volume. Therefore, the larger the spot, the faster the marking speed.