A5 M50 Pro
Laser Machine Parts
FB2 Foldable Enclosure
F3 Matrix Cutting Panel
R30 Infrared Laser Module
Air Assist Kit
B1 Protective Box
R3 Pro Roller
X7 Pro Extension Kit
A5 Pro Extension Kit
F2 Honeycomb Working Panel
F1 Honeycomb Working Panel
M100 Laser Module
M50 Laser Module
M40 Laser Module
M30 Laser Module
130W Quad Laser Module with Air Assist System
12 Months maintenance
1. The M100 laser module can be installed on any engraving machine model of Atomstack 5W series and 10W series (A10 Pro/S10 Pro/X7 Pro), just use the corresponding adapter board, and it can be used without any additional settings.
2. Comes with a set of Atomstack air assist kit, which can greatly optimize your artistic creation and work. It can not only improve work efficiency, but also achieve flawless cutting. It is the best partner of your laser.
3. If you own other brands of engravers, such as Ortur, NEJE, Two-Trees, etc. You can also install our Atomstack M100 laser module, which comes with a free adapter in the box.
Higher laser power, faster engraving speed! NEW ATOMSTACK M100 20W four Ultrafine Compression Spot Laser Module: Can be used for laser cutting machine, laser engraving machine, CNC, DIY laser. Upgrade high quality fixed focus laser, no need to focus. The engraving speed is 200% higher than other 10W lasers.
1. It can be used for laser cutting machine, laser engraving machine, CNC, DIY laser.
2. Laser protective cover: The laser is equipped with a protective cover to protect the eyes of the user without the need to wear additional protective glasses. At the same time prevent pets from grabbing the laser spot.
3. Made of aluminum, strong and durable.
4. Upgraded high quality fixed-focus laser, no need to focus.
5. Aviation aluminum TTL driver board with cooling fan can ensure continuous long time work.
6. Engravable materials: wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective electroplating layer and lacquered metal, after blackening Utility knife.
7. Cutable material: cardboard, non-woven fabric, veneer, acrylic, some thin plastic board.
8. 0.08*0.1mm Four compression spot light coupling technology makes engraving more powerful
and precise .
9. Engraving speed is 200% higher than other 10W lasers.
10. High energy can cut 8.5mm thickness plates at one time.
11. The laser sintering temperature is 2400 degrees, the effect of engraving metal is better.
12. The laser has a built-in horizontal gyroscope anti-tip protection device, and it stops working when the tilt angle is 20°.
13. The wind-collecting hood can clean the smoke and dust to protect the lens to avoid laser energy attenuation.
14. The transfer circuit board is compatible with 95% of laser engraving machines on the market, including Atomstack, ortur, Neje, twotree, etc.
Laser module Specification:
Optical Output Power
Aluminum 6061 Anode
Circuit Board Size
V/PWM Modulation Board
22# 2P2.54 Terminal Reverse Wire 80mm
Laser Beam Mode
Product Net Weight
Optical Output Power
Air assist kit Specification:
10-30L/min (Adjustable airflow speed)
M100 Laser Module
PCB Circuit Board
Compatible Plate (A5 series and 10W series use different adapter boards, please pay attention to the distinction)
Fixed Focus Plate
Air assist kit
1. The laser light emitted by the laser module is likely to injure person's eye, so do not directly gaze its end surface and wear appropriate safety glasses to prevent laser light when it is working.
2. Laser module needs an appropriate laser driver (PCB). When the laser module connects with power supply, please set the output voltage to zero. The adjustment of the current should be slowly increased or decrease to avoid damaging the device.
3. Keep the device working or storing in a dry environment. The anti-dust grade is over one million, in order to prevent dust inside the lens to affect the laser dot shape.
4. Working at high temperatures will increase the threshold current, reduce conversion efficiency and speed up the aging of the device.
5. When output power is higher than it's specific parameter of operation, it will accelerate the aging of the device.
6. When the operation temperature of the laser diode is over 70 degree, please do well heat dissipation of it.
7. This laser module is an electrostatic sensitive device. Please make sure ground yourself or wear an antistatic wrist strap before you take it.