ATOMSTACK X20 Pro

130W Quad-Laser Engraving & Cutting Machine Built-in Air Assist System

● 12mm Solid wood Cutting in One-PASS.

● 8mm Acrylic Cutting in One-PASS.

● It can even cut 0.05mm thin sheet metal.

● Built-in Powerful air assist kit.

Buy now

12 Months maintenance

FAST DELIVERY

24-hour treatment

Product Video

X7 Pro(图1)

Item Model Number:	ATOMSTACK X20 Pro
Print Size:	Recommend Print Size 410*400mm
Carving Objects:	Wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective electroplating layer and paint surface layer metal, 304 stainless steel, glass, ceramics, cotton cloth, slate;
Cutting Objects:	Cardboard, non-woven fabric, wood board, acrylic, some thin plastic board, sponge;
Machine Power:	130W
Laser output power:	20W
Focusing method:	Fixed focus laser, no need to focus
Laser protective cover:	Protect the user's eyes and prevent pets from grabbing the laser spot.
Operating software:	LaserGRBL, LightBurn, support Win XP/Win 7/Win 8/Win 10 system.
Input Format:	NC, BMP, JPG, PNG, DXF, etc.
Data transmission method:	USB connection.
Input Voltage:	AC100-240V, 50/60Hz
Output Voltage:	DC12V, 5A
Certification:	CE FCC RoHS FDA PSE

X20 Pro Packing List
1×Atomstack X20 Pro machine	1×Air assist kit	1×Instruction

➢ When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles.

➢ Please do not touch the laser emitter with your hand, or it may burn your hand.

➢ Please avoid strong impact on the machine.

➢ Children under 14 are not allowed to use this product and children over 14 need adult supervision.

➢ The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.